There is a name at
The combination of the internal combustion engine and the electric machine is decisive: 2 drives that ideally complement each other. The internal combustion engine builds up power and torque with increasing speed. The maximum torque of the electric machine is immediately available. Result: The system torque of 850 Nm is already present at 1,400 rpm.
The 4.0-litre twin-turbo V8 engine with twin-scroll turbines achieves 404 kW (550 hp). The e-machine has 100 kW (136 hp), the overall system performance is an impressive 500 kW (680 hp).
Drive technology, whose roots lie in motorsports. Which was tested on the circuit. And find their way to the road in the new
In E-Power mode, the vehicle operates on electric power alone. If the accelerator pedal is depressed beyond the resistance point, the combustion engine switches on, enabling you to demand the maximum available total system power output at any time.
The intelligent Hybrid Auto mode offers the greatest operating efficiency for trips across town and country. In this mode, the
In E-Hold mode, the state of charge of the high-voltage battery is maintained at the current level. This means that the energy of the battery can be used at a later time, e.g. for all-electric driving or boosting.
When the vehicle is driven in E-Charge mode, the high-voltage battery is charged by the combustion engine. This is useful if activated, for example, on a section of motorway before a drive through town on electric power alone.
In SPORT mode, the combustion engine is activated by default and accelerates the
In SPORT PLUS mode, drivetrain and chassis are tuned for maximum performance. The top speed of 192 mph is also available in this mode. The performance reserves of the combustion engine are used to charge the battery – the energy produced can then be exploited for boosting as required.
© 2020 All rights reserved to
* Data determined in accordance with the measurement method required by law. Since 01 September 2018 all new cars are approved in accordance with the Worldwide Harmonized Light Vehicles Test Procedure (WLTP). You can find more information on WLTP at www.porsche.com/wltp. From 01 January 2019, all fuel consumption figures are shown as determined in accordance with WLTP. CO₂ figures will be shown as NEDC-equivalent values, as CO₂ based taxation will continue to be based on an NEDC value (derived from WLTP) until 06 April 2020. For Plug-in Hybrid Electric Vehicle (PHEV) range and Equivalent All Electric Range (EAER) figures are determined with the battery fully charged, using a combination of both battery power and fuel.
Values are provided for comparison only. To the extent that fuel and energy consumption or CO₂ values are given as ranges, these do not relate to a single, individual car and do not constitute part of the offer. Optional features and accessories can change relevant vehicle parameters such as weight, rolling resistance and aerodynamics which may result in a change in fuel or energy consumption and CO₂ values. Vehicle loading, topography, weather and traffic conditions, as well as individual driving styles, can all affect the actual fuel consumption, energy consumption, electrical range, and CO₂ emissions of a car.
** Important information about the all-electric