The Bi-Xenon main headlights feature automatic and dynamic range control, which provides uniform illumination of the road whether dipped or main beam is selected. The dynamic cornering light function swivels the headlights towards the inside of a bend based on the steering angle and road speed. The static cornering lights activate the auxiliary headlights so as to light up more of the road at tight bends and turns. In short: a greater part of the road ahead is illuminated the moment you enter a bend.
Standard in the
Ultra-exclusive accents are added by the optionally available Bi-Xenon main headlights in black including PDLS. On the
Standard in the
The three-dimensional design of the LED taillights pays homage to the 918 Spyder super sports car and lends an impressive appearance of depth. At the same time, they are especially responsive and powerful – and that means added safety. In the event of panic braking, the adaptive LED brake lights begin to pulsate, alerting following traffic more quickly to a critical situation. The third brake light is integrated in the roof spoiler.
What’s more, the LED taillights are also available with tinted lenses: standard on the
* Data determined in accordance with the measurement method required by law. Since 1 September 2017 certain new cars have been type approved in accordance with the Worldwide Harmonised Light Vehicles Test Procedure (WLTP), a more realistic test procedure to measure fuel/electricity consumption and CO₂ emissions. As of 1 September 2018 the WLTP replaced the New European Driving Cycle (NEDC). Due to the more realistic test conditions, the fuel/electricity consumption and CO₂ emission values determined in accordance with the WLTP will, in many cases, be higher than those determined in accordance with the NEDC. This may lead to corresponding changes in vehicle taxation from 1 September 2018. You can find more information on the difference between WLTP and NEDC at www.porsche.com/wltp.
Currently, we are still obliged to provide the NEDC values, regardless of the type approval process used. The additional reporting of the WLTP values is voluntary until their obligatory use. As far as new cars (which are type approved in accordance with the WLTP) are concerned, the NEDC values will, therefore, be derived from the WLTP values during the transition period. To the extent that NEDC values are given as ranges, these do not relate to a single, individual car and do not constitute part of the offer. They are intended solely as a means of comparing different types of vehicle. Extra features and accessories (attachments, tyre formats, etc.) can change relevant vehicle parameters such as weight, rolling resistance and aerodynamics and, in addition to weather and traffic conditions, as well as individual handling, can affect the fuel/electricity consumption, CO₂ emissions and performance values of a car.
** Important information about the all-electric